12 Years Factory wholesale 32″ rubber glove with cotton linning-rough finish Guatemala Manufacturer

FAQ Content

Mystic High Voltage 4×3 D/L Front Zip Wetsuit 2013

Available at: https://www.kingofwatersports.com/item.do?item=29528&path=mystic-high-voltage4x3-wetsuit-2013-i29528.html&canonical=http://www.kingofwatersports.com/mystic-high-voltage4x3-wetsuit-2013-i29528.html

It’s almost a lie to call this a ‘wet’-suit, with double liquid seals, inside and out and a new additional water barrier around the front zip, there’s no water getting through this bad boy. Boasting feather light foam and 100% M-Flex neoprene, this super flexible ultra lightweight suit is the Rolls Royce of wetsuits.

Neoprene:

M-FLEX (TRI SPAN) 100%
The most flexible neoprene in our range. M-flex gives maximum flex and durability.

TEDDY PRENE PLUSH
A soft feel interior lining that reflects body heat.

Smelly suits are History with Polygiene Technology

The Polygene will give your wetsuit a permanet odor control

Without Polygiene:
Odor-causing bacteria settles into the material and multiplies

With Polygiene:
Inhibits the growth of odor-causing bacteria in the material, creating an odor free effect

How it works:
Sweat is odorless but helps create the perfect environment for odor-causing bacteria to multiply. When sweat mixes with odor-causing bacteria on fabrics, odor results.

Polygiene uses natural silver salt, a highly effective antimicrobial agent, to safely inhibit the growth of odor-causing bacteria and fungi. However, Polygiene does not affect the natural bacterial flora of your skin. And without odor-causing bacteria, you stay fresh.

Features:

FRONT-ZIP SINGLE ENTRY
A single front-zip construction is positioned above the chest-panel. This entry provides more stretch for your back compared to a back-zip entry.

DEBOSSED NON SLIP CUFFS
A silicon print located inside the cuff, to keep your cuffs in position and prevent water from coming in.

DIAMOND KNEEPADS
Our kneepads are made using highly durable materials, which have tightly woven fibers for better scratch prevention.

DOUBLE NECK
Neoprene on the outside, glideskin on the inside. For a nice touch on the neck, and provides rash protection.

VELCRO ANKLE CLOSURE
Velcro ankle straps to tighten the leg cuffs.

COLOURED PK ZIP
A strong full coloured waterproof zipper, with an extra waterproof coating.

AQUAFLUSH
Perforated neoprene that allows water to exit the suit, preventing the leg cuffs from filling up with water.

AQUABARRIER
Silicone printing which forms a barrier, preventing water from entering your suit.

KEYPOCKET
Internal nylon key pocket, located on the inside of the suit.

200% DOUBLE S-SEAMS
A rubber coating applied over the GBS seam. The 200% s-seam is positioned on the outside and the inside of the suit. The S-seam gives the suit a high-end finish that is both durable and waterproof.

GLUED BLIND STITCHED
Stitching method whereby the panels are first glued together and then only stitched halfway through the fabric instead of fully perforating it, which makes the seams waterproof.

Features:

- Lightweight neoprene
- Flex (Tri-span) 100%
- Teddy prene (Plush) inside
- 100% Double S-seams (Liquid Seals) inside and outside
- GBS (Glued Blind Stitched)
- Front zip single
- PK coated zip
- Double neck construction
- Pre-shaped double neck construction
- Diamond kneepads
- Aquaflush
- Velcro ankle closure
- Debossed cuffs
- Non slip cuffs
- Key pocket

http://www.magnalight.com/p-50562-explosion-proof-blasting-light–led-blasting-gun-light–4-watt–rechargeable.aspx

Buy American Compliant

The Magnalight BLG-LED-4REX Explosion Proof LED Blasting Gun Light has a 4 watt LED that produces 130 lumens of intense LED illumination and is designed for extreme durability in media blasting applications. This powerful LED light is designed to be mounted to any standard blasting gun and is powered by rechargeable batteries so no cords or transformers are necessary. This light will run for 4 hours at full power on a single single charge. A specially designed mounting system and quick change protective shield allows operators to use this unit as a blasting gun mounted light source that will stand up to abusive use.

This LED blasting gun light features a specially designed mounting system which allows the unit to be attached to the end of any standard blasting gun. This mount includes all neccessary mounting hardware and a protective lens cover that can be removed and replaced even when wearing gloves. This protective lens is a simple slide in, slide out configuration that allows operators to pull the lens out and slide a new one in as the lens is worn out by exposure to blasting materials such as coal slag, sand and baking soda. This lens is constructed of tempered glass for durability and is held in place by a spring loaded fastener. A slot in the bottom of the lens holder allows particles to clear when performing lens changes.

Power for this blasting light is provided by included rechargeable batteries which give this unit a runtime of 4 hrs at maximum output. The high intensity LED in this light produces 130 lumens and has a lifetime of 50,000 hours. A rubber push button switch provides easy operation and a highly durable nylon housing provides excellent resistance to damage from impacts and vibrations. This unit is watertight and able to withstand the rigors of aggressive and heavy duty use applications. Compared to typical gun mounted blasting lights, this compact LED unit is light weight, offers freedom from electrical cords, and produces much brighter and intense illumination than comparable incandescent lights.

This explosion proof LED blasting light can be toggled between light modes by holding the switch down for a predetermined amount of time. Simply pressing the switch once activates the light in high mode producing a far reaching 130 lumen light beam. Holding the switch down activates the light in low mode and produces a moderate 50 lumens of useable light that will last for 12 hours. Extreme runtime is produced by holding the switch down for ten seconds to activate the light in dim mode, producing 1.3 lumens of light at 120 candela that will last for up to 480 hours.

Included with this light are 2 charging units with cords. Attach one of the charging cords to gain power, then attach to the light and the light will begin to charge. A 120V wall plug cord (VAC) and 12V vehicle cigarette plug cord (VDC) are both included.

Specifications / Additional Information

Lamp Type: C4 LED
Dimensions: Light Only- 6″ X 2″ X 2″
Watts: 4
LED Life Expectancy: 50,000 hours
Lumens: 130 High – 50 Medium – 1.3 Low
Lighting Configuration: Spot
Mounting: Clamp on Blasting Gun Mount
Lens: Quick Change Tempered Glass
Candela: 15,000 High – 5,700 Med – 120 Low
Burn Time: 4 Hrs High – 13 Hrs Med – 480 Hrs Low
Power: Rechargeable
Charging: 120 VAC Wall Unit- 12 VDC Vehicle Charging Unit

Approvals

Class I, Division I, Groups C, D
Class II, Division I, Groups C,D,F,G
Class I, Division II, Groups A – D
Class III,
T3 temperature rating

Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
www.magnalight.com

#larsonlights