13 Years Factory wholesale Isolater rubber sleeve for Lithuania

FAQ Content

SmartWasher is the whole new ball game in parts washers. Think of it as a 60 year old upgrade to the old solvent tank. Users are always surprised how well it works and on so many more applications. It works its best every time you use it, its a much better tool for the user, its safe with no harmful chemicals or fumes, its as green as it gets and makes financial sense. We have all the bases covered. The SmartWasher is a proprietary system involving a special cleaning solution called Ozzy Juice a particulate trap called Ozzy Mat and a naturally occurring process called bioremediation to neutralize or digest grease, oil, and hydrocarbon contaminants. That’s where our good friend Ozzy comes in. Ozzy is our nickname for a special blend of microbes, living organisms that safely and effectively neutralize contaminants inside the machine. Ozzy Juice cleans parts, Ozzy Mat traps the bits and Ozzy continually cleans the Ozzy Juice leaving it clean and strong for every use. Ozzy Juice is never hauled away. The fluid that starts in the SmartWasher, stays in it forever as long as two very quick and simple maintenance steps are done. You add to it but you never dump it. Ozzy juice is safe enough for Ozzy’s to live in and its safe for humans too. Not flammable, no harmful fumes or volatile organic compounds. Replacing a solvent tank with a SmartWasher eliminates a thousand pounds or more of special or hazardous waste per year. The fact that Ozzy Juice is PH neutral and not volatile, means that it can be used where solvents can’t like rubber, plastics, vinyl, painted or clear coated items, even textiles like mechanics gloves. There is just tons of uses that you just wouldn’t touch with traditional solvents because they’d be ruined. We make tall claims but we can back it up. Its the kind of thing you really have to try to believe!

The HECHT containment drum discharge station with lance type CFE-L
is used for contamination-free discharging of
drums with inner liner up to OEB 5.
To ensure operator and product protection, the
products supplied in drums are additionally
packed in film also referred to as liner.
The product must be packed in at least
one liner.
Discharging of drums using the suction
lance is suitable in the case of limited
space or weight-controlled removal
of product.
In the case of loss-in-weight systems,
the operator takes the drum via the roller
conveyor directly underneath the glove box.
The drum is positioned by means of the lifting
device.
Then the operator fixes the outer liner at the double O-ring port using a
clamping ring. He removes the residues of the previous liner using the
gloves and temporarily stores them in the glove box.
The drum is then pressed against the gasket at the bottom of the glove box
and fixed using the lifting device. The inner liner (product liner) is opened,
stabilized with a ring and sealed by means of an inflatable seal.
In order to stabilize the liner and facilitate discharging, the area between
drum and outer liner is evacuated, preventing the liner from being sucked
in by the suction lance.
The drum is now connected, and the powder can be sucked out of the drum
by means of a lance and vacuum. The linear guiding of the suction lance
supports the easy handling during discharge. After the drum has been
emptied, the residues of the previous liner can be disposed of in the drum.
As soon as the outer liner has been loosened, the drum is closed by means
of the double closing system as already described.
The empty drum can then be removed and a new cycle can be started.