14 Years Factory wholesale 26″ Industrial rubber glove-rough finish Kuala Lumpur Supplier

FAQ Content

http://www.footreliefinsoles.com Foot Relief Insoles are fluid filled insoles that have five primary benefits and a long list of secondary benefits. The insoles are designed to cushion, massage, absorb shock, give arch support, and increase circulation. The liquid insole will form to almost any shape foot giving you a customized fit after only a few minutes of wear. Many customers refer to our liquid filled insoles as “liquid orthotics” because of the way the insoles stretch slightly allowing the liquid to fill in the unique arches of your foot providing maximum comfort.

There are so many health benefits you will notice when wearing our liquid insoles. Foot Relief Insoles are designed with comfort and durability in mind. The pressure and stabilization points are arranged in a special configuration that separates us from our competitors and gives our insoles a higher level of comfort that you will most likely never get with other liquid filled, gel, foam, rubber, or silicone shoe insoles.

Not only do our insoles have a totally different feel than our competitors, many of our customers tell us that our insoles feel softer, more comfortable, and feel like they have more “gel” when compared back to back with our competitors at tradeshows and other events. Don’t be fooled by smooth talking sales pitches or internet hype or an inflated unrealistic warranty that you will most likely never use. With Foot Relief Insoles you can rest assured that comfort, quality, and durability, is exactly what you will get.

Foot relief insoles have been worn by customers with just about every foot and body related health condition you can think of, especially diabetics looking to improve circulation in their feet and legs. Some of the more common conditions that users report relief from while wearing our insoles include plantar fasciitis, heel pain, heel spurs, ball of foot pain, arch pain, ankle pain, knee pain, hip pain, and lower back pain

Video tutorial on the four different methods how to remove rust. Rust, also known as iron oxide is a chemical reaction between iron and oxygen or moisture that occurs on bare metal. Beyond steel, rust can also form on lower grades of stainless steel. It is very important to remove any rust from metal when applying a finish as it can jeopardize that finish by causing premature failure. The methods to remove rust are not limited to this video are beyond cleaning it by hand with just a wire brush, sandpaper, or an abrasive pad. Methods shown are mainly based for at home methods which can be done in the comforts of your own driveway.

Website: http://4diyers.com
Facebook: https://www.facebook.com/4diyers
Google Plus: https://plus.google.com/+4DIYers
Twitter: https://twitter.com/4DIYers
Instagram: https://www.instagram.com/4diyers/
Tumblr: http://4diyers.tumblr.com
Pintrest: https://www.pinterest.com/4diyers/

Tools/Supplies Needed:
-rust treatment (used in the video is Permatex Rust Dissolver Gel #80594)
-rubber gloves (used in the video is Permatex Black 5 mil Nitrile Disposable Gloves #08184)
-brush
-cup
-water
-white vinegar
-container
-abrasive pad
-sandblaster
-blasting media (glass bead, copper slag, walnut shells, steel shot, aluminum oxide, etc)
-air compressor
-safety glasses
-respirator
-drill
-angle grinder
-hand held sander
-rotary tool
-sanding disks or pads
-flap wheels
-wire wheels
-wire brush
-sandpaper
-grinding stone

Procedure:
Method #1
-using a store bought solution which is a form of rust treatment
-cleaning up any flaking paint, dirt, or loose rust using sandpaper or a wire brush
-shake the bottle to ensure the solution is mixed, poor into a cup or container, then applying using a brush or sponge
-do not allow it to come in contact with paint as it can cause damage
-it takes abut 15-20 minutes for the rust to be converted
-rinse with clean water
-allow it to dry and apply more coats if needed
-allow the metal to dry for 24 hours to ensure no moisture is trapped when applying a final finish
-this will neutralize old rust and prevent new rust from forming as well

Method #2
-using white vinegar and submerging the parts in a container
-clean up the piece slightly with either sandpaper or a wire brush
-allow it to soak for a day or two, depending on the severity of the rust
-once satisfied, rinse with water and give it a clean up using an abrasive pad
-ensure it has dried overnight so there isn’t any moisture trapped in the surface
-now you’re ready to apply a coating of your choice

Method #3
-using a sandblaster or some form of media blasting
-there is a variety of blasting equipment along with media available on the market
-normally a larger air compressor is required considering a sandblaster is a direct air loss
-this will remove the rust with minimal work, access any pitted areas as well, and strip areas to bare metal

Method #4
-using a mechanical method such as power tools
-there are a variety of tools that can be used such as a drill, angle grinder, hand held sander, rotary tool, etc
-with these tools, you will have a variety of attachments or options such as grinding disks, sanding disks, sanding pads, abrasive pads, wire wheels, grinding stones, flap wheels, etc
-in the video a hand held sander is used along with 180 grit sandpaper
-unfortunately due to the pitting, the sandpaper is unable to reach those lower areas
-sometimes an abrasive pad can tackle that, other times you will need to use a wire wheel

Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!

© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.