Excellent quality for 32″ Large cuff rubber glove supply for Mexico City

FAQ Content

Nutella Bread Recipe: https://www.youtube.com/watch?v=8eHPkpCGdEY

Watch more Closets, Storage & Organizers videos: http://www.howcast.com/videos/418839-How-to-Refinish-Closet-Doors

If your closet doors are looking a little shabby, you can refinish them yourself and get them looking new again.

Step 1: Remove the door from its frame
Take the door out of its frame and lay it across two sawhorses to keep it steady and level while you work.

Step 2: Remove hardware
Remove all of the door’s hardware, including doorknobs and hinges, using a screwdriver.

Step 3: Sand the door
Use a rotary sander to remove the old paint or finish. Start with a rough grade sandpaper, such as 60 grit, and sand the entire door. Then switch to a medium grade sandpaper, sand again, and, finally, sand the door with a fine grade sandpaper.

Step 4: Fill in voids
Dust the door and wipe it with a damp cloth. Then fill in any gouges, holes, or scratches with wood putty, and, when the putty dries, sand the filled areas.

Step 5: Seal and stain
Apply a coat of sealant if you’re staining the door. When the base coat is dry, brush the stain on in sections, applying thick coats and allowing it to pool. After one minute, remove excess stain with a paper towel or lint free rag.

Tip
Wear rubber gloves to avoid staining your hands.

Step 6: Prime and paint
Apply a coat of primer if you’re painting the door. When the primer is dry, brush the paint on in sections. Apply as many coats of paint as necessary, let the paint dry, reattach the hardware, and then hang your freshly painted door.

Step 7: Apply polyurethane
Apply a protective coat of polyurethane. Brush in one direction, applying a smooth, thin coat. Let it dry for eight hours, and then sand it with fine sandpaper or steel wool to make the finish dull. Then wipe away the dust and apply a second coat, sanding again after eight hours.

Step 8: Apply a final coat
Apply a third coat of polyurethane, let it dry for 24 hours, reattach the hardware, and hang your beautifully redecorated door.

Did You Know?
Silicon carbide, zirconia, ceramic, and garnet are the minerals most commonly used to manufacture sandpaper.

[http://www.comfortfoam.co.in] Welcome to Comfort Foam Products, Manufacturer of Latex Mattress & Pillows. The company was Established in 1979, at Mumbai. Modern infrastructure unit & Wide distribution network make us unique in the industry. We are supported by Latest technical support, Affordable prices, Superior quality & expert manpower. Our Production Facility is done with the help of our advanced machinery, to ensure the final output is perfect. We offer a wide array of Comfort Pillows, Foam Mattresses, Seats & Cushions. Our Standard, Classic & Contour Pillows are widely appreciated for its smoothness and optimum comfort features. We also provide Foam Mattresses that are highly demanded in the industry due to their high durability and superior quality. Natural & Comfort Zone Foam Mattress offered by us are a class apart. Our Foam Seats & Cushions enables the users to feel very relaxed and comfortable and get rid of tiredness instantly.