Good Quality 26″ Industrial rubber glove-Granule finish for South Korea
Short Description:
26″ length(65-67cm), black, granule finish, seamless, no cotton lining, left/right hand, 800g/pair, cuff perimeter: 61cm, double layer thickness:2.2mm. 50 pairs/case, carton size: 74*36*44cm. Net weight: 24kg/case, gross weight: 26kg/case. It can be suitable used sand blasting machine.
Product Detail
FAQ
Product Tags
It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand ! Good Quality 26″ Industrial rubber glove-Granule finish for South Korea, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.
26″ length(65-67cm), black, granule finish, seamless, no cotton lining, left/right hand, 800g/pair, cuff perimeter: 61cm, double layer thickness:2.2mm. 50 pairs/case, carton size: 74*36*44cm. Net weight: 24kg/case, gross weight: 26kg/case. It can be suitable used sand blasting machine.
FAQ Content
GaoMi DingChang Safety Protection Products Co., Ltd. is a factory that is developing, producing and marketing the safety gloves.The main products are natural latex coated gloves, nitrile coated gloves, PVC coated gloves, PU coated gloves, foam gloves, cut resistant gloves, yarn gloves etc.
Be safe! One viewer mentioned the importance of eye protection, I feel like an idiot for forgetting this. Don’t take any chances, please USE PROTECTIVE EYEWEAR!
Things you’ll need:
-rubber gloves
-eye protection
-well ventilated area
-Radio Shack PCB Etchant Solution ($12-15)
-glass jar and lid
-piece of string or cord (to suspend the knife)
-nail polish
-nail polish remover
-600+ grit sandpaper
-paper towels
-a safe working surface (newspaper, cardboard, etc.)
In this video I demonstrate how to acid etch a knife blade. It’s a simple and easy way for you to add your own creative customization to your knife. This is my first time attempting this project, it was successful, so I am sharing the process. DO THIS AT YOUR OWN RISK. I am leaving a few important tips below, but know that you can screw up your knife. That’s why I did it on a $18 knife this time. Besides that, have fun!
***Important tips***
If you are etching a folding knife…
1. Make SURE to coat (with nail polish) in and all around the pivot hole! If any of that surface is etched, it will affect the action of the knife, and probably ruin it.
2. Make sure to coat the locking surfaces, where the liner or frame lock touches the blade, same goes for a back lock, whatever kind of lock. If you’re unsure, just coat it!
Coat the cutting edge WELL!
Notes about the video: I sped up a lot of it because I didn’t necessarily want to cut out the parts I did the work, yet I didn’t want the video to end up 30 minutes long! If you have any questions at all, ask in the comments, I’ll get back to you. Hope this helps, thanks for watching!
Dispose of your etchant solution safely. Either neutralize it completely, or contact your local waste management office and ask what to do with it. Don’t risk the environmental damage and possible damage to your pipe.
