New Arrival China Rubber shoe cover Hawaii Manufacturer
Short Description:
Rubber shoe cover, three dimensional, textured sole for slip resistance, water proof, good resistance against acid and alkali, non-toxic, No stimulating smell. They can be widely used in industry. 4 sizes. Different colors are available. Package: 50 pairs/case.
Product Detail
FAQ
Product Tags
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation.
New Arrival China Rubber shoe cover Hawaii Manufacturer, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.
Rubber shoe cover, three dimensional, textured sole for slip resistance, water proof, good resistance against acid and alkali, non-toxic, No stimulating smell. They can be widely used in industry. 4 sizes. Different colors are available. Package: 50 pairs/case.
FAQ Content
This month’s Hunt Vault is all about getting your game to the table. In this box they are going to help you move your deer, take care of your rifle, get lined up for the shot, and get your food ready to chow. Cool concept for this box – check it out!
Hunt Vault website: www.huntvault.com
_______
SHOP here and SUPPORT Everyday Tactical Vids:
http://tinyurl.com/ETV-Amazon-Search
MY FAVORITE SURVIVAL KNIVES
Mora Light My Fire: http://tinyurl.com/ETV-MoraLMF
Benchmade Bushcrafter: http://tinyurl.com/BMadeBC-ETV
Ontario Knife RAT 7: http://tinyurl.com/OntRAT7
Tops Knives Brothers of Bushcraft: http://tinyurl.com/TOPSK-BOB
MY FAVORITE EDC KNIVES
CRKT Squid: http://tinyurl.com/CRKTSQ-ETV
Benchmade Griptilian: http://tinyurl.com/BMadeGrip-ETV
Spyderco Tencious: http://tinyurl.com/SpydercoTen-ETV
CRKT Fossil: http://tinyurl.com/CRKTFossilETV
MY FAVORITE FLASHLIGHTS
Streamlight Microstream: http://tinyurl.com/StrLightMicroS-ETV
Surefire Fury: http://tinyurl.com/SFireFury-ETV
Olight S1 Baton: http://tinyurl.com/OlightS1ETV
Thrunite Archer 1AV2: http://tinyurl.com/TNiteArcher1AV2
MY FAVORITE SURVIVAL TOOLS
Bahco Laplander Saw: http://tinyurl.com/BahcoLLETV
Corona Folding Saw: http://tinyurl.com/CoronaFS10-ETV
Mechanix Gloves: http://tinyurl.com/MechGlvETV
Large Firesteel: http://tinyurl.com/LRGFSTEEL-ETV
_______
CONNECT WITH ETV
YouTube – https://www.youtube.com/EverydayTacticalVids
Twitter – https://twitter.com/EverydayTactic1
Facebook – https://www.facebook.com/pages/Everyday-Tactical-
Vids/396490423756541
Instagram – http://instagram.com/everyday_tactical_vids/
Tumblr – http://everydaytacticalvids.tumblr.com/
Google+ – http://tinyurl.com/EverydayTacticalVidsGooglePlus
_______
Everyday Tactical Vids: Thinking Tactically, Living Purposefully
Everyday Tactical Vids exists to help individuals become an asset to self and others in everyday life and crisis situations.
_______
PEOPLE WHO HAVE BEEN AN INFLUENCE ON EVERYDAY TACTICAL VIDS:
- Lt. Colonel Dave Grossman, originator of The Sheepdog Concept
- Travis Haley of Haley Strategic
- Chris Costa of Costa Ludus
- The team over at ITS Tactical
- NutnFancy and his YouTube channel/community
- Tom Brown Jr. of The Tracker School
- Dave Canterbury of The Pathfinder School
- Rob Pincus of I.C.E. Training
Video tutorial on how to strip the paint from a valve cover. If you are deciding on painting your valve cover or polishing an aluminum cover, then you will need to strip any existing painted finish. Removing the existing paint from a valve cover is extremely important before adding new paint as you may currently have pealing issues or there can be oil residue trapped underneath which will cause pealing issues for the new paint finish. Stripping paint from a valve cover is certainly not limited to the method shown in this video, but this is an at home method that can be done with minimal tools and cost. Here I am working with a cast aluminum valve cover, but this procedure also applies to steel valve covers as well.
How to Polish Aluminum Like a Mirror: https://www.youtube.com/watch?v=vCIZWyfXlLo
Website: http://4diyers.com
Patreon: https://www.patreon.com/4diyers
Facebook: https://www.facebook.com/4diyers
Google Plus: https://plus.google.com/+4DIYers
Twitter: https://twitter.com/4DIYers
Instagram: https://www.instagram.com/4diyers/
Tumblr: http://4diyers.tumblr.com
Pintrest: https://www.pinterest.com/4diyers/
Tools/Supplies Needed:
-safety glasses
-gloves
-paint brush
-paint stripper
-brass wire brush
-water
-degreaser
-nylon brush
-ratchet and socket set
-valve cover gasket
Procedure:
-first start by removing the valve cover
-removal process will vary, but for the most part they are fairly straight forward
-some engines may require a speciality tool to hold the camshafts in place if the bearings are intergraded into the valve cover like Volvo
-when removing the valve cover, I would highly recommend replacing the gasket too
-once you’ve removed the valve cover, we must degrease it
-this will ensure the paint doesn’t have a barrier against the paint stripper
-spray the cleaner onto the cover and allow it to soak into the build up for a minute, then agitate the surface with a brush
-wash both the top side and underside of the cover
-any oil residue is also important to remove for painting because it reduces the chance of any contamination
-this may take a little time depending on the severity of the build up
-once done the valve cover will need to dry now as any water residue can neutralize the paint stripper
-work in a well ventilated area
-next I am using a brush on style paint strippers
-there are various products available on the market along with application types
-this product does come in a jug, so I dump a desired amount into an old disposable cup
-then apply to the cover using a brush
-it’s best to use a smaller brush as you’re able to get into those hard to reach or tight areas
-I would highly recommend wear rubber gloves and safety glasses as protection
-it’s best not to work in direct sunlight and on an extremely hot day as this can affect how the product removes the paint
-it can take anywhere from 5 to 15 minutes for it to sufficiently peal up the existing
-this will also depend on the paint that is used, some paints are more resistance to paint strippers
-if you have a smooth valve cover you can use a plastic scrapper which will reduce the chance of damaging the metal surface
-considering this is an uneven surface, I’ll be using a brass wire brush
-only use a brass wire brush on aluminum valve covers as it won’t excessively scratch the surface
-apply more stripper if needed for the paint that is still in place
-after all the paint has been remove, rinse off the brush or scrapper and valve cover with water to neutralize the paint stripper
-you may need to agitate the surface with the brass wire brush if needed
-once all the paint has been removed and now it’s ready for paint
Thank you to all those who watch my videos and support my content. Don’t forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.





