2016 Latest Design Rubber glove-household for Kuwait Manufacturer

FAQ Content

Blending the Rubber Ingredients:
The industrial process for making bicycle tires starts with raw synthetic rubber being fed into a milling machine. Rollers within the machine break up and soften the rubber. Other ingredients, such as mineral oil, zinc oxide, sulfur, carbon black and silica are then added to the rubber while it is being milled. These ingredients are mixed thoroughly with the rubber and make it more elastic and durable. Once completely mixed, the rubber is ready to be processed.
Casing Preparation:
Some of the rubber is then spread by a roller press to form a wide, thin, continuous sheet of rubber. The sheet is then fed into another machine to be bonded to woven nylon matting. The matting is removed from large roles and passed through the bonding machine along with the rubber sheet. The two are then welded together.

Casing Construction
A metal drum in a forming machine is then used to construct the layers of the tire. First, the nylon matting and rubber material is cut into properly sized strips that will become the casing of the tire. The strips are then placed around the drum so that the ends meet to form a complete ring. Two Kevlar cords are then wound onto the matting and completely around the drum. These will act as the rims of the tire. The drum is then expanded, forcing the Kevlar cords onto the rubber on the matting. The edges of the matting are then folded over the Kevlar cords.
Tread Construction
Two layers of hard and dense rubber are then sandwiched together and formed into a strip that is a precise width and thickness. A piece of this rubber strip is then laid onto the center of, and completely around, the casing. This material will eventually form the tread of the tire. The finished tire casing is now ready to be pressed and vulcanized.
Tire Pressing
The casing is next inserted into a press that will heat the rubber and form the tire in a process called vulcanization. This process first melts the rubber, fusing all of the parts of the tire together. Then the tire is pressed into a mold that creates the treads. As the rubber cools, it hardens into its final form. The finished tire can then be removed from the press.
Testing
A sampling from each batch of newly made tires is then tested. The road wear test simulates thousands of miles of wear on the tires. The puncture resistance and pressurization limit of the tires is also tested. If the sampling passes these tests, the tires are then packaged for sale.

JeffJag is a Denver, CO abstract artist who posts high quality time-lapse and stop motion videos of his artwork every other Friday. Daily updated Art Blog – http://artblog.jeffjag.com

This video was released a week apart from the others as part of my Awesome October promotion. Check out what it’s all about here – http://youtu.be/-T6IdAEFIzU

This one has been a while in the making, and it’s not the last video I’ll have for this drawing. This is animation progress 15, recorded on September 17th, 20th and 27th, 2013.

MATERIALS:
The drawing is called Amazing Realization, and it is an enormous pencil drawing on a 22″ x 30″ sheet of fine heavy bristol drawing paper. In the drawing, I use many 0.3mm mechanical pencils. I use mostly to HB and 2B graphite leads. I occasionally use paper shaders and erasers to blend the pencil, but again, the vast majority of it is hand shaded using a very careful amount of hand pressure.

TECHNIQUES:
Whenever I’m holding the pencil much further back from the tip, I’m allowing the pencil’s own weight to press down on the paper which makes for very soft shading. I am also not a robot drawing robot, so I use erasers. I use the white plastic erasers that work so well with drafting pencils, and the rubber gray kneadable erasers you can form into shapes. I like those for lightening areas which have been filled in too dark, and to keep my pencils from rolling off my drawing desk when I’m not using them. I use a horse hair eraser brush to remove eraser shavings from the drawing without smudging my work. I sometimes use a latex glove on my left hand to keep the oil of my hand from getting on the paper, and for a similar reason, I put a sheet of paper under my drawing hand to keep from smudging parts I’ve already drawn while shading.

THE STORY:
Last year I started a Kickstarter to make prints of my new drawing, Amazing Realization, for people who wanted them. This is quite an epic project which began in mid November 2012 and continues months into 2013. On January 1st 2013 the Kickstarter was successfully funded at over 200% of my goal. Now I’m just working away at finishing the drawing and doing what I can to show the making-of process along the way. The backers get email updates with new photos showing the progress of the drawing the night I work on it, and I release the photo updates of the drawing daily on my Art blog, http://artblog.jeffjag.com, my facebook fan page http://www.facebook.com/jeffjag.art and my twitter feed @jeffjag (all three feature the same daily content). Check out the kickstarter page and watch the video of me announcing the project on that page. http://www.kickstarter.com/projects/112182510/super-detailed-abstract-pencil-art-amazing-realiza

TIME SPENT:
I started this drawing in November 2012 and I’m in the last stretch of drawing in of this video. At the time this video was posted, frames have been captured up through video 17. So there’s a lot left, but it’s getting close. For this video alone (number FIFTEEN), I captured 5,544 frames. Each of these frames was taken between 1 and 10 seconds apart. It varies due to the nature of stop motion and the complexities of drawing with one hand and capturing frames with the other hand. I’ll have a rough estimate by the time I post the final time-lapse project video. Subscribe to my channel and you’ll get it delivered right to you from the friendly YouTube folks.

SOUNDTRACK – “Ultra Jibs” by JeffJag
The soundtrack was created using Moog Animoog and Korg iElectribe apps on iOS. It was mixed in Soundbooth. All composing, recording, sequencing, and mixing was done by myself specifically for this stop motion time-lapse video. The soundtrack is licensed exclusively for this video and is only available in this video since that is it’s exclusive purpose and why I created it in the first place. The track is not available for download or for commercial purchase. (This notice is posted here as proof of my commercial use rights for the song I created just for this video.)

TIME-LAPSE and STOP MOTION
Stop motion and Time-Lapse are used at different intervals during this video. The first two videos in the series were shot at a frame every 5-8 seconds. Later on, I decided to get out my remote shutter release and you can see me holding the button in my left hand as I draw with my right hand. Starting with video 10, I use a wireless shutter release which is super awesome.

WHAT’S WITH THE LATEX GLOVE?
I use a latex glove on my left hand while I draw to keep the oil of my hand from getting on the paper. I place a white sheet of paper under my right hand so I can shade without smudging what I’ve already done. Because I have to move my right hand while drawing, this keeps my hand free to move over areas I may have already drawn without smearing the work.