2017 wholesale price Isolater rubber sleeve for moldova Factory

Short Description:

14”length (35cm), black, smooth finish, seamless, no cotton lining, 350g/pair, cuff perimeter:61cm, double layer thickness:2.2mm. 40 pairs/case. Net weight: 12.8kg/case, gross weight: 13.8kg/case. It can be suitable for sand blasting machine, dry box, isolater operation for arm protection.


Product Detail

FAQ

Product Tags

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for the new products. 2017 wholesale price Isolater rubber sleeve for moldova Factory, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.


14”length (35cm), black, smooth finish, seamless, no cotton lining, 350g/pair, cuff perimeter:61cm, double layer thickness:2.2mm. 40 pairs/case. Net weight: 12.8kg/case, gross weight: 13.8kg/case. It can be suitable for sand blasting machine, dry box, isolater operation for arm protection.

  • Previous:
  • Next:
  • FAQ Content




  • JUAL:
    Abrasive Blasting:
    Aluminium Cut Wire, Zinc Shot, Sus Shot, Copper Cut Wire, Steel Shot, Steel Grit, Plastick Media, GARNET, Brown Aluminium Oxide, White Aluminium Oxide, GLASS BEADS, PS Ball etc.

    Abrasive Blasting Equipment:
    Shotblast machine, CLEMCO Blasting machine,KOMPAC Blaster 750 (Blasting Cabinet Machine), Vibratory barel finishing machine etc.

    Abrasive Blasting Accecories:
    Replacement part Blasting machine

    Painting Equipment :
    GRACO Airless pump, Paint Pot, Airless Gun, one seal, airless hose, Switch Tip, tip guard and otther spare part airless pump .

    ELCOMETER Measuring & Testing Equipment :
    Coating Thickness Painting Inspection Instrument, Surface Profile Gauge, Digital Surface Profile Gauge, Testex Tape, Thickness Gauge, Surface Comparator, Keane-Tator Surface Profile Comparator, Rubert and Rugotest Surface Comparator, Ships Propeller Roughness Comparators, Pictorial Surface Standards, Salt Contamination Meter, Chloride Ion Test Kit for Abrasives ConcreteChloride In Test Detection Kit, Dewmeter, Dew Meter, Whirling Hygrometer, Sling Hygrometer, Dewpoint Dew Point Calculator, Magnetic Thermometer, Wet Film Wheel, Hexagonal Wet Film Comb, Wet Film Comb, Destructive Coating Thickness Gauge, Sberg Drill, Dal Thickness GaugeMechanical Coating Thickness Gauge, Coating Thickness Gauge, Surface Preparation, Wet Film Thickness Measurement, Humidity Temperature, Hardness Porosity Detection, Surface Profile Comparator

    Contact Info:
    Phone:021-3274 8088
    E-mail:sandblastingsupply@gmail.com



    ♥Watch in HD please! OPEN ME :) !♥
    Store: http://littlesurprises.storenvy.com/

    I have typed out all the instructions down below! If you have any questions, please read the tips section first AND I am goingto assume you are reading the instructions too! Also, I bought this kit in Japan in August of 2012, so I don’t know if that affected the kit at all. Thank you guys so much for watching!

    ♥What the kit contains♥
    - Part A (100g)
    - Part B (40g)
    - Plastic Gloves
    - 2 Measuring Cups
    - Plastic Stirring Stick
    - Instructions Page

    ♥Ratio is 100g:40g♥
    NOTE: This is a 10:4 ratio kit. This means any of these combinations or variations will work:
    5g Part A to 2g Part B
    10g Part A to 4g Part B
    20 g Part A to 8g Part B (this is what I used)
    40g Part A to 16g Part B
    80 g Part A to 32g Part B
    100 g Part A to 40g Part B
    etc

    ♥Instructions♥
    1. Measure 20g Part A
    2. Mix in your desired color (You may need between 3-5 drops BUT this may mess up the solification process. I only used 1-2 drops but the color didn’t come through in the end)
    3. Measure 8g Part B
    4. Mix VERY quickly, within 30-45 seconds
    5. Pour into your desired mold, FAST and only up to 1/5 of the height. This thing rises FIVE TIMES its height.
    6. Wait at LEAST 20 minutes for hardening, especially if you live in a humid environment! A full hour will ensure that the squishy will not be deformed when squished! Again, this also depends on the mold you use!
    7. Shade with whatever you would like to: chalk pastels, paint, eyeshadows, etc. Go experiment!

    ♥Tips♥
    1. DO NOT pour Part B directly into Part A for two reasons:
    a) You need a precise measurement of 8 grams to 20 grams (or any other ratio combinations), and since you want to be precise, you may go slowly, and the chemical reaction will start occuring before you can pour it into your mold.
    b) The chemical reaction is VERY fast, and if you pour it in unevenly, only part of Part A will mix with Part B, and your squishies may come out LIQUIDY. No good.
    2. BE SURE TO WEAR GLOVES. These are chemicals you are dealing with, and like resin, these can give you skin irritations.
    3. Be VERY fast in mixing Part A to Part B to ensure full mixing and proper squishy solidification.
    4. DO NOT touch the foam while it is rising, it can get stuck on your fingers and your clothes.
    5. Rubbing Alcohol can remove the liquid Part A or Part B or the mixture from the plastic stirring stick and your hands. It may be harder to get the hardened foam off the plastic stick with the rubbing alcohol.

    ♥Squishiness♥
    This all depends on a few factors:
    - if your foam sticks to the mold its in (plastic, silicone, rubber, etc)
    - if the correct ratios were added
    - temperature/humidity of the environment you are doing the reaction in

    Have fun! Go experiment, but be safe!

    ♥FAQ♥
    1. What camera do you use?
    Canon EOS Kiss X4 or Canon Powershot SX280 HS

    2. What editor do you use?
    The good ole simple “Windows Live Movie Maker” (WLMM). As of late May 2014, I am using iMovie as well.

    3. What glaze do you use?
    Triple Thick (works for me, so why not!)

    4. What brands of polymer clay do you usually use?
    Sculpey III & Premo

    Music usually by:

    http://incompetech.com/

    http://www.joshwoodward.com/#/

    ♥Little Surprises Links♥:
    ♥Sophie&Toffee Coupon: http://sophieandtoffee.refr.cc/PWG2MQ5
    ♥Second Channel: http://www.youtube.com/surprisevlogs
    ♥Store: http://littlesurprises.storenvy.com/
    ♥Facebook: http://goo.gl/jZCAe
    ♥Email: LittleSurprisesStore@gmail.com

    Send your message to us:

    INQUIRY NOW
    • [cf7ic]

    Related Products

    INQUIRY NOW
    • [cf7ic]