Newly Arrival 14″ Household rubber glove for Jordan Manufacturer

FAQ Content

Amazon link for tyres up to 265mm http://amzn.to/2hxuPKO
Don’t get Caught out this year get some easy to use and help you get through snow and ice and help you also brake better in snow and ice.
The advantages of these are there light weight and less chance of damaging your alloy wheels with the metal of a chain coming in to contact with your wheel these are made from plastic and nylon only the studs and the pull though holders are metal.
Hi people when you fit these to your car or truck there are a few things you need to do I would have thought would be common sense.
1. Make sure that no metal part of the kit is in contact with the alloy or steel rim the strap should be the only part that is in contact with the wheel so the fixing part of the strap should be on the tyre not touching the rim itself.
2.A good idea in snow regardless if you are fitting these is to lower your tyre pressure just a bit so your tyre has a larger footprint on the road more tyre more grip.
3.You drive as recommend no more than 40KPH I would recommend a max of 30KPH to be on the safe side better slower and get home safe and sound.
4.Only fit these if you have a tyre of the size that these are meant for if you put these on skinny tyres your gonna have problems buy the set to fit narrower tyres.

** MAX SPEED OF 25 MPH AND SHOULD ONLY BE USED IN SNOW OR ICE IF USED ON TARMAC THEY COULD GET DAMAGED FAST ***
You get 6 in the bag with a pair of gloves and also a tool to help you pull the webbing though I went each side of a spoke on the alloy so the tracks would not move about.Very easy to fit you only need them on the drive wheels front wheel drive on the front rear on the rear and 4X4 I will be putting them on the front of my Disco.
Super antiskid nails with higher density & larger size , Dichotomanthes nail surface for better antiskid effect.
Universal model, fits all models with 6.5inch-10.4inch/165mm-265mm tire width.
Zinc alloy fixed buckle,real material made special fasteners with strong abrasion resistance.
Low temperature resistant, 100% pure Dichotomanthes material, resistant to low temperature of minus 50 degrees Celsius.
6 pieces of chain, one tire need to be installed 3 pieces. Applicable to snowfield, uphill,soil sliding environment.
ote:
. 40 km/h speed limit.
. Slamming on the brake, a sharp turn prohibited.
. Suitable for all models with 165mm-265mm tire width !

Kindly Remind:
The anti-skid chain guarantee manufacturing defects only, damages brought by such reasons as speeding, improper installation, expired use, drving on asphalt or concrete pavement rather than icy and snowy pavement not guaranteed. Producer do not undertake any liability for property damage and personal injury caused by anti-skid chain.

Package includes:
. 6 x Anti-slip Chain
. 1 x Tool
. 1 x User Manual

♥Watch in HD please! OPEN ME !♥
Store: http://littlesurprises.storenvy.com/

I have typed out all the instructions down below! If you have any questions, please read the tips section first AND I am goingto assume you are reading the instructions too! Also, I bought this kit in Japan in August of 2012, so I don’t know if that affected the kit at all. Thank you guys so much for watching!

♥What the kit contains♥
- Part A (100g)
- Part B (40g)
- Plastic Gloves
- 2 Measuring Cups
- Plastic Stirring Stick
- Instructions Page

♥Ratio is 100g:40g♥
NOTE: This is a 10:4 ratio kit. This means any of these combinations or variations will work:
5g Part A to 2g Part B
10g Part A to 4g Part B
20 g Part A to 8g Part B (this is what I used)
40g Part A to 16g Part B
80 g Part A to 32g Part B
100 g Part A to 40g Part B
etc

♥Instructions♥
1. Measure 20g Part A
2. Mix in your desired color (You may need between 3-5 drops BUT this may mess up the solification process. I only used 1-2 drops but the color didn’t come through in the end)
3. Measure 8g Part B
4. Mix VERY quickly, within 30-45 seconds
5. Pour into your desired mold, FAST and only up to 1/5 of the height. This thing rises FIVE TIMES its height.
6. Wait at LEAST 20 minutes for hardening, especially if you live in a humid environment! A full hour will ensure that the squishy will not be deformed when squished! Again, this also depends on the mold you use!
7. Shade with whatever you would like to: chalk pastels, paint, eyeshadows, etc. Go experiment!

♥Tips♥
1. DO NOT pour Part B directly into Part A for two reasons:
a) You need a precise measurement of 8 grams to 20 grams (or any other ratio combinations), and since you want to be precise, you may go slowly, and the chemical reaction will start occuring before you can pour it into your mold.
b) The chemical reaction is VERY fast, and if you pour it in unevenly, only part of Part A will mix with Part B, and your squishies may come out LIQUIDY. No good.
2. BE SURE TO WEAR GLOVES. These are chemicals you are dealing with, and like resin, these can give you skin irritations.
3. Be VERY fast in mixing Part A to Part B to ensure full mixing and proper squishy solidification.
4. DO NOT touch the foam while it is rising, it can get stuck on your fingers and your clothes.
5. Rubbing Alcohol can remove the liquid Part A or Part B or the mixture from the plastic stirring stick and your hands. It may be harder to get the hardened foam off the plastic stick with the rubbing alcohol.

♥Squishiness♥
This all depends on a few factors:
- if your foam sticks to the mold its in (plastic, silicone, rubber, etc)
- if the correct ratios were added
- temperature/humidity of the environment you are doing the reaction in

Have fun! Go experiment, but be safe!

♥FAQ♥
1. What camera do you use?
Canon EOS Kiss X4 or Canon Powershot SX280 HS

2. What editor do you use?
The good ole simple “Windows Live Movie Maker” (WLMM). As of late May 2014, I am using iMovie as well.

3. What glaze do you use?
Triple Thick (works for me, so why not!)

4. What brands of polymer clay do you usually use?
Sculpey III & Premo

Music usually by:

http://incompetech.com/

http://www.joshwoodward.com/#/

♥Little Surprises Links♥:
♥Sophie&Toffee Coupon: http://sophieandtoffee.refr.cc/PWG2MQ5
♥Second Channel: http://www.youtube.com/surprisevlogs
♥Store: http://littlesurprises.storenvy.com/
♥Facebook: http://goo.gl/jZCAe
♥Email: LittleSurprisesStore@gmail.com